For years you've been asking me for a way to get polish and wax off your paint's surface by machine. I'm happy to say this Blue Support Pad and these removal bonnets work great. It is the best solution for removing polish and wax easily, and leaves your arm fresh for other things. This system removes about 95% of the polish and wax. For a final detail and enhanced clarity, just lightly spray the surface with water, Speed Shine®, or our Spray-On Wax and buff out with our 100% Cotton Buffing Cloths or our Micro Fiber Cloths. Be sure to use our Blue Support Pad as it is designed specifically to accept the removal bonnets and keeps them in place while you are working. Place the bonnet over the pad, set your machine to low, and watch the polish and wax disappear. Do not use these bonnets on direct drive polishers or any orbital other than ours without our support pad or damage can occur due to heat build up. Polish bonnets come in a three set pack as you'll need to use all three for a normal size vehicle as the polish and wax builds up on the pad during use. Rinse clean with water or machine wash using warm water and then air dry. For the best clean, use our Micro Fiber Cleaner. Made exclusively for us and you, too.